It doesn’t matter what kind of welding you do. What matters is, how you protect yourself while you’re going about your business. Welding may be your job or even your passion, but that doesn’t discount all the danger that it poses to anyone who holds that welding gun.

In this day and age, dangers from burns have been reduced, mainly due to education, and partly due to the horror stories that have abounded throughout the welder community. The other danger has always been fumes and gases. Yes, the gases produced are harmful to health, but these instances have been reduced as the observation of health and safety procedures has intensified. Many are already aware of how important your hands are, but are you sure those gloves are providing enough protection, especially dealing with such heat?

The one that is most important, and very close to the work that a welder does is the heat. Arc welding is known to produce temperatures of over 10,000 degrees Fahrenheit. But that’s not all, there are also a variety of sparks and sputters that are thrown off the welding area that has been known to cause severe burns.

It’s because of this, that Personal Protective Equipment is very important in this line of work. The single most important part of the PPE is the safety features of the gloves. What kind of gloves are they? Will they protect you from the dangers? How long will they last?

These are just some questions that we asked ourselves while we were compiling our list of the top 8 best MIG, TIG, and stick welding gloves.



Top MIG, TIG, STICK Hand Protection in 2020

1. Lincoln Electric Traditional Stick Welding Gloves

There are various forms of welding out there. Some can only be attempted in a professional environment; others will draw amateur enthusiasts who just can’t shake away the DIY infection that they’ve contracted. For all the stick welders though, the Lincoln Electric Traditional Stick Welding Gloves has got your back.

Lincoln Electric is known for producing a wide range of welding equipment and consumables, all of the highest quality. This latest addition to their personal protective equipment features a sock lining to increase comfort while it’s in use. It is held together by Kevlar stitching to complement the welted seams. The protection is topped off by a cuff to hold the gloves in place while you work.

Pros

  • High grade leather is excellent at protection.
  • The design is worth looking at several times over.
  •  Designed to be comfortable for long stretches of use.

Cons

  • The gloves may fit large for smaller hands.
  • They can feel awkward as the fingers are all the same size.

2. Better Grip Leather Gloves

Here is a pair of gloves that have been made to match the brand name of the manufacturer. It utilizes shoulder split leather to provide excellent gripping strength for your tools. The shoulder split leather is also made to be heat resistant.

Probably one of the better-designed gloves on the market at the moment, the Better Grip Leather Gloves utilizes a side thumb to increase flexibility, and ensure comfortableness while it’s in use. The palm area does not have any seams running through it, making for a comfortable glove.

To increase protection, this glove is held together by Kevlar stitching. This not only reinforces the leather but also improves on protection from heat.

Pros

  • Kevlar stitching is an important protection against heat.
  • Shoulder split leather is one of the best forms of leather.
  • The overall build quality is top-notch.

Cons

  • The gloves come only in one size.
  • The all-grey color is easily stainable.

3. Miller Arc Armor 263339

Who said to be a welder means you have to put on PPE that looks like it was cut from a single piece of material? Here, Miller challenges convention by coming up with gloves that look like they were meant for the engineering and mechanical departments of the Starfleet.

The Miller Arc Armor 263339 gloves are a perfect melding of black and blue, with the palm being blue and bleeding into the knuckles, then black taking over for the outside of the gloves. All this color doesn’t detract from its protection credentials though. The gloves are made from cowhide and then reinforced with pig leather on the palm area and the top side.

The design is completed by a 100 percent wool lining that gives flame-resistant insulation. The wing thumb and pre-curved fingers make this pair a comfortable option to have.

Pros

  • The insulation is perfect.
  •  Is very comfortable to wear and operate in.
  • Comes in multiple sizes.

Cons

  • The insulation promotes increased sweating inside.
  • The double layers make it difficult to grip a welding gun for extended periods.

4. John Tullman and Co 50L

John Tullman & Co was founded with the express purpose of providing industry workers with personal protective equipment. They have been at it since 1928 and therefore have a lot of experience when it comes to manufacturing welding gloves. And their knowledge shows with this pair.

The John Tullman and Co 50L is a pair of gloves that use top-grain leather as a base. The palms and the back are then reinforced with split leather and the lining is 100 percent fleece for flame resistance. The forefinger is seamless and it has an elastic back to hold the glove in place while you make the world a better place, one weld at a time.

Pros

  • Very comfortable to wear and operate with.
  • Excellent protection from heat.
  • Excellent flexibility.

Cons

  • The inner lining will come off when you pull your hands out.
  • Not great for welding overhead.

5. Steiner 21923-L

Steiner another company that has taken its time to grow and provide excellent solutions to those who would need personal protective equipment. And this shows the amount of thought that has gone into this product.

The Steiner 21923-L recognizes that everyone has their own individual tastes. For that, they came up with these gloves that provide protection that goes beyond the forearm, specifically, over the elbow. They made all this length from high-grade split leather.

For added protection, they included a 100 percent cotton lining to provide insulation from heat. The back is insulated by foam and the thumbs are reinforced by the use of straps.

Pros

  • Excellent protection over the entire forearm to the elbow.
  • Gloves are of heavy duty.
  • Soft feel and very flexible.

Cons

  • It only comes in two sizes; large and extra-large.
  • The stitching needs more work.

6. Caiman 1878-5

The Caiman 1878-5 looks like it was designed to be a true multipurpose pair of gloves. They look like they could be used by the welders of great architectural structures, but still be at home helping Robin Hood take down the Sheriff of Nottingham and Prince John. All that aside though, these are gloves that are purposely designed for overhead welding, stick welding, and plasma welding as well.

It is 21 inches in length, enough to cover your forearm and is still able to provide excellent protection thanks to the deerskin leather construction. There also is a leather strip added on top of the palm area for extra protection. All of this is held together by Kevlar stitching.

Pros

  • Great for plasma, overhead or stick welding.
  • Molds itself nicely to the shape of your hands.
  • Are quite comfortable to wear and operate in for extended periods of time.

Cons

  • The thickness means it gets hot inside very quickly.
  • The stitching can be a let down in some cases.

7. US Forge 400

Have you always been a fan of the Smurfs, or probably wanted to fight for Smurfette’s affections while you were at it? The US Forge 400 is a pair of gloves that will help you prove to her what kind of a technician you are with your beautiful welding… well, if she was real.

As the design principle suggests, the form should always follow function, and that’s what dictates how good these gloves are. These are one of the most comfortable gloves on the market as a result of the excellent cotton lining. They are also made to be durable by utilizing lock stitching.

The top grain leather has been dyed a bright blue, but this does not take away from the fact that it is a high-quality leather that offers excellent protection.

Pros

  • Despite the build quality, these are an affordable pair of gloves.
  • They are built to go with you to battle for a very long time.
  • The comfortability of the cotton lining is top-notch.

Cons

  • Not meant for overhead welding.
  • They may be a bit larger even though they are a one-size-fits-all build.

8. Handing Workshop Welding Gloves

Some of the gloves out there look like they were meant for people with drab taste. The colors are too pedestrian and there are no eye-catching designs on them. Not this one though. It looks like something that was copied straight from The Elder Scrolls Skyrim Mages College.

The blue and gold meld perfectly with the functional features of the glove. Split leather for protection from the intense heat is complemented by the sweat-absorbing cotton lining. They are also skid resistant to minimize handling accidents while you work.

The palm has also been reinforced to add protection when handling heavy stuff, that may also be hot.

Pros

  • Excellent protection from the heat.
  • Wonderful features for the price.
  • Great flexibility.

Cons

  • The gloves may feel large in smaller hands.
  • Lack of Kevlar stitching reduces protection.

Conclusion

Welding is a very satisfying profession to venture into. However, it is fraught with its own dangers. The high temperatures from the arc can cause severe problems when the operator is left unprotected. This is why gloves are important.

However, not every glove out there may be the best for you. For most out there though, the Caiman 1878-5 may be the best option for you. The all-round protection it gives to a number of enthusiasts is unparalleled even by some of the gloves in this very list.